HOME

New Unopened ProTek RC 160T SERVO and HORN- Low 注文 Profile High Speed / Torque High Volt Aluminum Case. Savox Sanwa KO Propo Futaba

商品説明・詳細
送料・お届け

商品情報

PACKAGE IS STILL FACTORY SEALED IN PLASTIC WRAPPERBUYER TO PAY IMMEDIATELY AFTER WINNING AUCTIONBUYER TO NOTIFY SYSTEM IMMEDIATELY WHEN RECEIVEDWE WILL SHIP BY 09:00 NEXT DAYNEW BIDDERS, BIDDERS WITH BAD RATING HISTORY WILL BE CANCELLED.THANK YOU
SERVO
Features:Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle applicationFull aluminum caseHigh voltage circuitry0.08 transit speed, and 216 oz-in of torque @ 6.0V0.06 transit speed, and 274 oz-in of torque @ 7.4VAluminum single arm servo hornFull metal gears and dual ball bearings160mm long 22awg connector wire w/gold plated connectorsCoreless motorServo Model
1705
Recommended Application1/12 to 1/10 scale Surface
Operating Voltage4.8V - 7.4V
Operating Temperature14° to 140° F (-10 to +60° C)Operating Speed @ 6.0V0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
216 oz-in (15.5 kg-cm)
Dynamic Torque @ 7.4V
274 oz-in (19.7 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft25 Tooth
GearsMetalWeight54.5gPulse/Frequency
1520?s / 333hz

HORN

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one black anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.
Features:Clamp design16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)3.5mm thick arm31mm Overall lengthLinkage holes threaded for 3mm hardware25T Spline ProTek Output Shaft

ProTek RC 140T Low Profile High Torque Metal Gear Servo (High Voltage) [PTK-140T]

ProTek RC160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case - RC Hobbies USA

ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case [PTK-160T] - AMain Hobbies

ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo (High Voltage/Metal Case)

Spektrum RC S6230 Digital Steel Gear High Torque Low Profile Servo

ProTek RC 160T Metal Servo Gear Set

ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case [PTK-160T] - AMain Hobbies

ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage PTK-160T

ProTek RC B6.4 & B7 Aluminum Clamping Servo Horn (25T-Futaba/Savox/ProTek)

ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case (PTK160T)

Protek Servos

Amazon.com: ProTek RC 160T Low Profile Digital "High Torque" Metal Gear Servo (High Voltage/Metal Case) : Toys & Games

Protek Servos

Amazon.com: ProTek RC 160T Low Profile Digital "High Torque" Metal Gear Servo (High Voltage/Metal Case) : Toys & Games

残り 8 点 8,999円

（147 ポイント還元！）

翌日お届け可（営業日のみ） ※一部地域を除く

お届け日: 11月28日〜指定可お届け日: (明日10:00のご注文まで)

ラッピング

対応決済方法

クレジットカード
コンビニ前払い決済
代金引換: 商品到着と引き換えにお支払いいただけます。 (送料を含む合計金額が￥288,825 まで対応可能)
ペイジー前払い決済(ATM/ネットバンキング): 以下の金融機関のATM/ネットバンクからお支払い頂けます
みずほ銀行、三菱ＵＦＪ銀行、三井住友銀行
りそな銀行、ゆうちょ銀行、各地方銀行
Amazon Pay(Amazonアカウントでお支払い)